Amigurumi Angel on a swing Free Pattern

Angel on a swing

Growth Angel 12 cm from the crown to the toes.

The toy fits with the frame.

Difficulty: medium.

Tools and materials:

• yarn COCO Vita Cotton (100% cotton mercer., 50 g / 240 m) flesh-colored – 20g

• Color City Amazon yarn (45% bamboo / 55% cotton; 50g / 155m) – about 8-10 g (dress)

• hook 1.5

• insulation wire d = 0.9-1.0

• wool floss Riolis, color of your choice

• fine wool or white mohair – for wings. I took Angora Fine yarn (50% mohair / 50%

nylon; 50g / 300m)

• bead wire d = 0.3 mm

• eyes can be made in any way that you like – stick plastic

half beads, take glass on a loop, embroider, knit from wool, draw on fabric and

stick in place

• for painted eyes: acrylic paints in white, light blue, dark blue and black

• a small piece of white cotton fabric

• the thinnest brush №3 / 0

• glossy acrylic varnish

• glue Crystal Moment

• adhesive plaster

• glass jar with a wide neck: bottom diameter 12 cm, height 19 cm

• a piece of thin board or plywood about 3 × 7 cm in size

• a square of dense fabric or thin burlap larger than the diameter of the neck of the can

about 5-6 cm


Magic ring – amigurumi ring

Ch – air loop

Sl-st – connecting column

Hdc – half crochet

Sc – single crochet

İnc – increase (2Sc in one loop)

İnc Hdc – increase in half crochet (2 Hdc in one loop)

Dec – “invisible” decrease (grab the front walls of 2 loops and knit 1Sc)

Dec * – 2Sc knit together

Dec Hdc – decrease half crochet (2 crochet half crochet together)

Dc – Double crochet

İnc – rotate work clockwise

İnc * – turn work counterclockwise


The head fits from the crown to the neck. Stuff in the process.

1 p: ​​6Sc in Magic ring = 6

2 p: (İnc) × 6 = 12

3 p: (1Sc, İnc) × 6 = 18

4 p: (1Sc, İnc, 1Sc) × 6 = 24

5 p: (3Sc, İnc) × 6 = 30 set the marker of the beginning of the row

6 p: (1Sc, İnc, 3Sc) × 6 = 36

7-11 p: 36Sc (5 rows) +1 p offset

12 p: 12Sc, Dec, 3Sc, Dec, 3Sc, Dec, 12Sc = 33

Mark the second decrease with an additional marker – this is the center of the face.

13 p: 33Sc

14 p: 11Sc, İnc, 1Sc, İnc, 2Sc, İnc, 2Sc, İnc, 1Sc, İnc, 11Sc = 38

15 p: 3Sc, Dec, 28Sc, Dec, 3Sc = 36

Mark the center of the face with a marker – two loops above the third increase. At this point, the nose will be embroidered.

Count 10 loops from the center of the face left and right and set between the 14th and 15th rows

extra markers for the ears.

16 p: 36Sc +1 p offset

17 p: (2Sc, Dec, 2Sc) × 6 = 30

18 p: (3Sc, Dec) × 6 = 24

19 p: (1Sc, Dec, 1Sc) × 6 = 18

20 p: (Dec *) × 9 = 9

Fasten, cut, and hide the thread inside out. Stuff your head completely.

The ears

Right ear

Step back one row from the right marker and fasten the working thread in this place. To the point where

there is a marker (between the 14th and 15th rows), tie 4Sc. Cut the thread, leaving a tail of about 15

see Insert this left tail into the needle and fasten the left edge of the eyelet one row below the marker.

Left ear

Knit in the same way as the right one, but you need to start from the bottom of the marker.


In the marked place, exactly between the ears, embroider a few stitches in the nose.


Make a frame for the hands. Cut two pieces of wire about 10 cm long. Make at one end


Link a chain of 4Ch.

1 p: ​​starting from the second loop from the hook: 2Sc, 2Sc to the last loop of the chain, 2Sc, İnc = 8

2-3r: 8Sc (2 rows)

Left hand

4 p: 4Ch, Sl-st in the same loop on which the last Sc, 8Sc is connected

Insert the frame into the palm of your hand and continue to knit around the wire.

5 p: skip the previous row Sl-st, (Dec, 2Sc) × 2 = 6

6-15 p: 6Sc (10 rows)

Right hand

4 p: 4Sc, 4Ch, Sl-st in the same loop on which the last Sc is connected,


Insert the frame into the palm of your hand and continue to knit around the wire.

5 p: Dec, 2Sc, skip Sl-st of the previous row, Dec, 2Sc = 6

6-15 p: 6Sc (10 rows)

End with a connecting post. Cut the working thread and stretch it inside out.

No need to stuff pens.


The position of the marker of the beginning of the row to change only if

when will be indicated in the description.

Link a chain of 4Ch.

1 p: ​​starting from the 2nd loop of the chain: 2Sc, 2Sc in

last loop of the chain, 2Sc, İnc = 8

2-4p: 8Sc (3 rows)

5 p: 1Sc, (İnc Hdc) × 2, 5Sc = 10

6 p: 1Sc, (Dec) × 2, 5Sc = 8

Cut pieces of wire about 16 cm long, bend one end with a loop, fix it with one

a round of adhesive plaster. Bend the blanks slightly, marking the heel and insert into the foot.

Roll a small ball from a tiny piece of filler. This is necessary in order to stick out

the fibers did not interfere with knitting further and did not get knitted in the fabric. Put this ball in the heel.

7 p: (Dec) × 2, 4Sc = 6

8 p: 6Sc

9 p: 1Sc, İnc, 4Sc = 7

10 p: 7Sc +1 p offset

11 p: 1Sc, İnc, 5Sc = 8

12-14 r: 8Sc (3 rows + 1 p displacement

Roll up a small “sausage” from the filler (roll in the palms, like plasticine). Tweezers neatly

put it in the leg in the back, it will be the calf muscle. The working thread is slightly on the side.

15 p: (Dec) × 2, 1Sc, (İnc) × 2 (knee), 1Sc = 8

16 p: 1Sc, İnc, 1Sc, (Dec) × 2 (knee), 1Sc = 7

Roll a tiny ball from the filler and place it on the knee.

17 p: 7Sc

18 p: 2Sc, İnc (back), 4Sc = 8

19-22 r: 8Sc (4 rows)

Run Sl-st. On the left leg, cut the thread and hide it on the inside.

On the right leg, tie another 1Sc (or how much you can get) – the working thread is exactly on the side.

Set the beginning row marker. Now the thread can also be cut.

In the process of knitting, add filler around the frame, just a little bit so that the legs only

kept in shape.


Continue to knit with the right foot. In the place where the marker is located, attach the white thread and

continue to knit panties.

1 p: ​​4Sc, 4Ch, 8Sc along the left leg (start knitting exactly between the legs), 4Sc along the chain of Ch, 4Sc = 24

2 p: 1Sc, 1Hdc, İnc Hdc, 6Hdc, İnc Hdc, 1Hdc, 13Sc = 26

3 p: 2Sc, 10Hdc, 14Sc = 26

Bend the wires coming from the legs so that they touch in the center of the body and fasten

a small piece of adhesive tape (no more than 2 turns).

4 p: 26Sc

5 p: 4Sc, Dec, 4Sc, Dec, 3Sc, change the thread to flesh color: 11Sc = 24 +1 p offset

6 p: 2Sc, Dec, 5Sc, Dec, 3Sc, Dec, 5Sc, Dec, 1Sc = 20

7 p: 3Sc, Dec, 1Sc, Dec, 12Sc = 18

8p: 18Sc

9 p: 1Sc, Dec, 4Sc, Dec, 9Sc = 16

Using adhesive tape, fasten the frame of the hands and body.

Fill the body. Stuffing is not very dense, the body should be soft and crumple well

Find the center of the back and set a new marker for the start of the row. Now all loops count then him.

10 p: 3Sc, 2Sc together loops of the left hand and body, 6Sc, 2Sc together loops of the right hand and body, 3Sc = 16

11 p: 2Sc, Dec * (one loop of the back, the second is the hands), 2Sc, Dec * (one loop of the hand, the second is the front), 4Sc, Dec *

(one loop of the front, the second of the hands), 2Sc, Dec * (one loop of the hands, the second of the back), 2Sc = 16

12 p: (1Sc, Dec, 1Sc) × 4 = 12

13 p: (1Sc, Dec) × 4 = 8

14 p: 8Sc

15 p: 2Sc, Sl-st (the working thread is on the side, so the “step” at the end of the row is less noticeable)

Cut the thread and secure it on the wrong side.

Cut off excess wire coming out of the body, put a head on it and sew it.

Head decoration

Make a little eye tightening. The place of the tie is between the 12th and 13th rows (two rows above the nose).

Tighten just a little, so that only the holes for the eyes appear. We fasten the hooks to the back of the head, all

equally then this place will hide under the hair. Tighten the ponytails from the hooks into a knitted needle (with a blunt

tip) and hide inside the head.

To make the face more expressive, you can toned the eye sockets, nose bridge, apply shadows and



To make the hair look the most natural and interesting, you can take three shades of floss – bright orange (No. 236), yellow (No. 234) and pumpkin colors (but you can make them the same color).

Cut the yarn into segments of 16-18 cm. this is not a play doll, but an interior one, it’s not worth much

to torment and fasten the hair with a loop, it is enough to simply stretch the locks through the loops of the canvas. Take

3 strings. From time to time, you need to take strings of different colors: two bright orange and one or

yellow or pumpkin flowers.

Start fastening for the 5th row. Leave the sector without hair in front, attach the bangs last.

Then fasten the locks for the 3rd row. After that, fix the hair on the crown.

On the back of the head, fasten two rows along the parting. Divide the hair into two parts, carefully comb the hair

blunt needle (do it very carefully, try not to pull out the locks) and tie the “low” tails

(or braid the braids).

Now you can make a bang. For her, cut the yarn in segments of 6-7 cm. In the same way, stretch the strands.

through the loops. Cut the bangs to the desired length. Be careful not to cut too short.

If the bangs are puffed, you can sprinkle it with steam from the iron (in no case touch the hair,

keep the iron at a distance of 5-10 cm) and smooth the bangs with your hands.

Trim the length of the tails, cut them obliquely (no need to make an even cut, it doesn’t look


Draw eyes

For drawing, you need to take 4 colors of acrylic paints – white, black, light blue and blue. Tassel

take the thinnest. When drawing eyes, we follow the rule: we draw from light shades to dark.

Therefore, we start with white, and at the end we draw with black paint.

Mark ovals 5.5 × 6.0 mm on the fabric. After that, draw a contour of the eye.

These sizes are for a head crocheted from COCO Vita Cotton yarn (3.8 × 3.3 cm). You yourself

adjust the size of the ovals. You can even draw a few pairs of eyes and then select the most


White paint over the whites of the eyes. Then paint the iris with light blue paint. Let dry

Pose of each color.

On the palette, mix a drop of light blue and dark blue paints over the top of the iris.

Draw a contour along the lower edge of the ovals and shade a little. Let dry again.

In the center, draw black pupils and feather their upper part.

Very neat black paint to draw the contour of the eyes. Draw the upper eyelid with a thicker line. By

the inner part of the upper eyelid line slightly bifurcated, simulating cilia.

You can still shade whites of the eyes in the upper part under the eyelids. To do this, mix a little on the palette

white paint and quite a bit of black, should get a light gray tint. Gently paint over

upper corners of proteins under the eyelids.

White paint to perform glare on the iris. Allow eyes to dry well.

Finished eyes carefully cut with manicure scissors.

Black paint over the upper sections very carefully to

the white color of the base fibers was not visible. Fabric marker

I do not advise drawing, because it spreads on thin tissue, and

dirty streaks form.

Try ready eyes to face, choose a suitable position

eye and stick. When the glue dries, carefully use a toothpick

apply glossy varnish to eyes.

Thin brown yarn to embroider with two stitches of eyebrows.


Yarn Color City Amazon yellow, hook 1.5. Knit in rotary rows.


Link a chain of 21Ch. Knit further, starting from the 2nd from the hook of the loop.

1 p: ​​20Sc, 1Ch, İnc *

2 p: 3Sc, 6Ch, skip 3 loops of the base, 8Sc, 6Ch, skip 3 loops of the base, 3Sc, 1Ch, İnc *

3 p: 2Sc, skip 2 loops (one on the canvas, the second on a chain of Ch), 4Sc on a chain of Ch,

skip 2 loops (one on a chain of Ch, the second on the canvas), 6Sc, skip 2 loops, 4Sc on

chain of Ch, skip 2 loops, 2Sc


Continue knitting on the second side of the set of chains from Ch.

1 p: ​​(2Sc, İnc, 1Sc) × 5, 1Ch, İnc * = 25

2-4 r: 25Sc, 1Ch, İnc * (3 rows)

5 p: (1Sc, İnc, 3Sc) × 5, 1Ch, İnc * = 30

6-8 r: 30Sc, 1Ch, İnc * (3 rows)

9 p: (1Sc, 1Ch) × 30

Cut the thread and secure it on the wrong side.

Put the dress on Angel and sew it from the back to about the waist. Fasten and cut the thread.

Author’s toy of Olga Goncharova


Link a chain of 6Ch. Knit starting from the 2nd from the hook of the loop:

1 p: ​​3Sc, 2Sl-st, 1Ch, İnc

2 p: 4Sc, 4Ch, İnc

3 p: 3Sc by chain, 4Sc, 1Ch, İnc

4 p: skip the first column and starting from the 2nd column: 4Sc, 4Ch, İnc

5 p: 3Sc by chain, 4Sc, 1Ch, İnc

6 p: skip the first column and starting from the 2nd column: 4Sc, 4Ch, İnc

7 p: (knitting a double bead wire under the columns) 3Sc in a chain, 4Sc, 2Sc in Ch

lifting, on the side 4Sc

Shorten the wires emerging from the wings, leave tails about 2.5 cm.

Use a thick sewing needle to pierce the dimples in the back into which to carefully insert these wires. Wings

sew to the back.

Jar with a swing

Take a suitable can with a wide neck.

On a piece of thick cardboard, circle the neck and cut out the lid for the can. With an awl, pierce 4 holes

in this cover. The holes should not be located exactly in the center, but should be slightly shifted


Cut two pieces of twine or harsh thread and pull them through the holes.

Cut a rectangle from a thin board or plywood

about 7 × 3 cm in size – a seat for a swing. Highly

make a thin drill in the corners of the hole. Thread through

twine them, adjust the height of the swing and tie

fixing knots.

Author’s toy of Olga Goncharova

Set Angel on a swing and lower it into a jar. Cut a square larger than diameter from fabric

the neck of the jar is about 5-6 cm. Cover the jar on top and secure with twine.

The angel is ready!

Many thanks to Natasha Orlova (Mink) for help in testing. Her angel is tied out

Semenov yarn KAROLINA, crochet 1.25. Knitting inside out. The hair is made of wool for

felting. Button growth was 10 cm.

The master class is intended solely for personal use. It must not be resold, placed

on their pages in social networks, copy partially or completely, replicate in any way.

When posting photos of your toys made using this master class on any

Internet resources, please indicate the author of the development:

You can sell toys related to this MK via the Internet, but the photos you

place in your store, your toys should be made, not mine.

Thank you for understanding!

Yorum yapın