Yarn Adelia Valerie (KHT can) – the main
Mink from Nazar Rus- for a fur coat
Hooks No. 1.75 and No. 2 for fur
3 black half beads – for nose and eye.
Clay Gel Moment
A piece of white felt
Needles for stitching and for tightening
Strong threads – for tightenings
For tinting – oil or oil pastels
Adhesive plaster – for insulation of wire
Thin wire (2 pieces of 15cm)
For fastening – 2 buttons, can be replaced
on cotter pins.
Magic Ring – Amigurumi Ring
Ch – air loop
Loop – offset loop
Sc – single crochet
Hdc – half crochet
pr – increase, from one loop we knit two
Dec Decrease two stitches together
Sl-st – connecting column
(…) * N- knit what is in brackets Nth
number of times
Attention: All details fit right on the main
yarn with which we knit a muzzle, paws and a body
DO NOT CROSS !!!!
LOWER FEET (2 pcs)
1) 6Sc in
2) (1Sc, arr) * 3 (9)
3-8) over 9Sc (6 rows)
9) 3 Ch, 3Sc skip, 6 Sc (9)
10) (1Sc, Dec) * 3 (6)
Pull the remaining loops, cut the thread, tip
We continue to knit paws, for this we attach
thread to the left edge of the opening of the foot.
11-12) on 6Sc
at the first foot, cut and hide the thread, and at
do not cut the second thread, because will be
continue to knit the torso.
13) We collect a chain of 15 Ch, attach
the second foot, starting from the middle of its lateral
parts, look so that the toes of the feet look at
6Sc on the second foot, 15Sc on the chain, 6Sc on
the first foot (put the marker).
We stuff in the knitting process.
1) 15 Sc on the other side of the chain, 27 Sc
2-3) 20Sc, 17Hdc, 5Sc (42) 1 Loop
4-6) 15Hdc, 5Sc, 17 Hdc, 5 Sc (42)
7-8) over 42 Sc
Insert the wire into the legs, for this bend it
in half, in the form of a loop, wrap the ends
with a band-aid. Add a little to the feet
9) 15Sc, (Dec, 1Sc) * 3, 9Sc, (Dec, 1Sc) * 3 (36)
11) (4Sc, Dec) * 6 (30)
13) (3Sc, Dec) * 6 (24)
14-17) 24 Sc each (4 rows)
18) (2 Sc, Dec) * 6 (18)
19-21) 18Sc (3 rows)
22) (1Sc, Dec) * 6 (12)
Insert the mount, I have a button, if any
cotter pins or joints please use these
24) Dec * 6. Loops, hide the thread.
Girls, you can just sew on head to body, in
In this case, we knit up to 23 rows, the loops do not
You can also not insert the wire, but then for
sustainability toys will need to be put
any weight down the torso.
We start with the main yarn.
1) 6Sc in
2) (1Sc, pr) * 3 (9)
3) (2Sc, pr) * 3 (12)
4) (3Sc, pr) * 3 (15)
5) 6) 7) 15Sc
8) (1Sc, pr) * 7.1Sc (22)
9) pr * 11, 11Sc (33) Where are the increases, this is the top
10) (4Sc, pr) * 6, 3Sc (39)
11) pr * 2, 17Sc, pr * 3, 16 Sc, pr (45)
13) pr * 2, 19Sc, pr * 4, 18 Sc, pr * 2 (53)
14) 53 Sc.
Change to a fur thread.
15) (5Sc, Dec) * 7, 4Sc (46)
We put a mark on the head, in the 13th row, below
head, exactly in the middle.
16) (Dec, 9 Sc, Dec, 10 Sc) * 2 (42)
17) (4Sc, Dec) * 7 (35)
19) (3Sc, Dec) * 7 (28)
fasten the head
21) (2Sc, Dec) * 7 (21)
23) (1Sc, Dec) * 7 (14) fill with filler
24) Dec * 7
Loops, hide the thread.
Eye tightening. Find the starting point Oh, she
located at the bottom of the front of the head, exactly
in the middle.
We put points for the eyes. To step away from a circle
nose in three rows left and right (on the top
edge of the nose) These will be points 1 and 2.
We fall from points 1 and 2 down the row by two, from them
left and right for 2-3 loops to the side – get
points 3 and 4.
We start weights from point 0.
The thread inside the part 0–1, then the thread on top 1-3,
pull the thread inside 3-0, tie a knot,
don’t cut off! Go to the second eye:
The thread inside the part is 0-2, then the thread on top is 2-4,
again we tighten the thread inside 4-0, fix it,
The nose of the nose. Point 5 is the beginning of knitting,
down the nose down 2 rows,
Nose shorts: thread inside 0-5, then thread on top 5-
6, the thread inside is 6-0.
TOP Paws (2pcs)
We knit the main thread.
1) 6 in
2) (1Sc, arr) * 3 (9)
4) Dec * 2, 5Sc (7) add a lump of filler
5-13) for 7Sc (9 rows)
14) (1Sc, Dec) * 2, 1Sc (5)
Fill a little bit, tighten the hole. Optionally in
front legs can also insert wire.
EARS (2 pcs)
1) 6Sc in
2) pr * 6 (12)
3) (1Sc, pr) * 6 (18)
4) (2Sc, pr) * 6 (24)
5) (3 Sc, pr) * 6 (30)
6) 4 Sc together, 1Sl-st. Thread cut, leaving
Knits in a fur thread, in rotary rows.
1) We collect a chain of 8 Ch, start with the second
loop hook 7Sc, Ch, İnc (7)
2) pr, 5Sc, pr, Ch, İnc (9)
3) 9Sc, Ch, İnc (9)
4) pr, 7 Sc, pr, Ch, İnc (11)
5) pr, 9 Sc, pr, Ch, İnc (13)
6-7) 13 Sc, Ch, İnc (13)
8) pr, 11 Sc, pr (15)
9-11) 15Sc, Ch, İnc (15)
12) pr, 13 Sc, pr, Ch, İnc (17)
13-14) 17 Sc, Ch, İnc (17)
15) Dec * 2, 13 Sc, Dec * 2. Cut, fasten and thread
Girls, if you want to do a belly button
we do before sewing on the fur coat;
sides of the back, and on the back we tighten and
tie a knot, then sew
a fur coat. Sew a fur coat with a blind seam.
Try on ears – burrs, sew on.
collapse droplets, you can even by the edge
fasten with a stitch.
Glue spout. Eyes are half-beads, I have 4
mm, stick on a circle cut from felt, then
glue in place for the eyes.
Toned with either pastel or oil
paint. We begin to tint with the lightest
tones, dimming color gradually, and not everywhere,
eyebrows – darkening inside a speck, eyes –
darkening at the edge of the eye.
The circle of felt should be slightly larger in diameter
gluing the eye, we move the half bead to the very
the upper boundary of the circle, it will be up the eyes,
below the squirrels will be a little larger, look
Cilia at will, you can glue, but you can
dispense with them.
Sew handles exactly on the sides of the body
, in a thread way. Then they will be mobile.
That’s it, our hedgehog baby Yagoda is ready!
We decorate our Berry, come up with an image.