“Lolo and Pepe Penguins”
The size of the toy depends on the yarn and your choice.
hook. Lolo is knitted from dolphin fayn, his height is 19 cm, Pepe
knitted from Yarnart velor, its height is 21 cm
Both toys are crocheted number 2.
The main materials for the toy:
– plush yarn (I used “Himalayas” “Dolphin
file “(175 m / 100 g.)): primary color (less skein) – number
29 (Lolo);
At Pepe “YarnArt” “Velor” – number 860
add. color – number 08 or 01 (less than half a skein);
– yarn “Vita” “Coco” or analogues – for stitching parts and
for knitting an eye (white and black);
– yarn “YarnArt” “Jeans” on the beak and legs (color number 77);
– “Yarnart” “Mink” on a small breast (color 330, completely
Little);
– hooks (I use 2 mm for toys, 1.25 mm for eyes);
– hollofiber or sintepuh (or any filler that
you usually use);
– needle, marker, scissors.
Legend:
Magic Ring – Amigurumi Ring
Ch – air loop
Sc – single crochet
İnc – increase
Dec – decrease
Sl-st – connecting column
Dc – Double crochet
Hdc – half crochet
Amigurumi ring on plush yarn is not done right
as usual, since the yarn is voluminous, we do it
so: We dial 2 Ch, and in 2 loops from the hook we do 6
Sc, connect Sl-st with the first loop, the ring is ready =)
I knit the way “crosses”, so the canvas turns
denser, and plush yarn seems even more beautiful =)
Well =) We start our knitting =)
Wings (2 pcs.):
We knit in rotary rows, in
beginning of each row do Ch
lifting.
We knit 2 details (2 additional details.
color and 2 main, thread by
end of knitting
do not crop with the main color)
(see diagram)
2 Ch
1) from the second loop we knit 3 Sc in
one loop
2) 3 Sc
3) İnc, 1 Sc, İnc (5)
4) 5 Sc
5) İnc, 3 Sc, İnc (7)
6) 7 Sc
7) İnc, 5 Sc, İnc (9)
8) İnc, 7 Sat, İnc (11)
9) – 14) 11 Sc (6 rows)
15) Dec, 7 Sc, Dec (9)
16) 9 Sc
17) Dec, 5 Sc, Dec (7)
18) -19) 7 Sc (2 rows), add. colors
fasten the thread, cut it off; at
do not cut the main color (we will sew wings with this thread
between themselves).
Connect our wings
and around the perimeter
we tie Sc with the main
color, at the tip of the wing
make 3 Sc (corner), on top
you should get 7
Sc, cut the thread,
we fix. The wings will
knit into the body.
We knit the second wing for sure
same.
We knit the body – the head, and
we will knit the wings along
knitting.
1) 6 Sc in Magic Ring
2) 6 İnc (12)
3) (1 Sc, İnc) * 6 (18)
4) 1 Sc, İnc, (2 Sc, İnc) * 5, 1 Sc
(24)
5) (3 Sc, İnc) * 6 (30)
6) 2 Sc, İnc, (4 Sc, İnc) * 5, 2 Sc
(36)
7) (5 Sc, İnc) * 6 (42)
8) 3 Sc, İnc, (6 Sc, İnc) * 5, 3 Sc
(48)
9) (7 Sc, İnc) * 6 (54)
10) 4 Sc, İnc, (8 Sc, İnc) * 5, 4 Sc
(60)
11) – 16) 60 Sc (6 rows)
17) (8 Sc, Dec) * 6 (54)
18-19) 54 Sc (2 rows)
20) (7 Sc, Dec) * 6 (48)
21) – 23) 48 Sc (3 rows)
24) (6 Sc, Dec) * 6 (42)
25) – 26) 42 Sc (2 rows)
27) (5 Sc, Dec) * 6 (36)
28) -29) 36 Sc (2 rows)
30) (4 Sc, Dec) * 6 (30)
31) -32) 30 Sc (2 rows)
33) We knit wings (we knit
through the walls of the wing and body
at the same time):
8 Sc, 7 Sc with wing, 8
Sc, 7 Sc with wing
34) (3 Sc, Dec) * 6 (24)
35) – 36) 24 Sc (2 rows)
37) (2 Sc, Dec) * 6 (18), fill
body
Next, we knit immediately the head
38) 18 İnc (36 Sc)
39) (5 Sc, İnc) * 6 (42)
40) 3 Sc, İnc, (6 Sc, İnc) * 5, 3 Sc (48)
41) (7 Sc, İnc) * 6 (54)
42) 4 Sc, İnc, (8 Sc, İnc) * 5, 4 Sc (60)
43) – 49) 60 Sc (7 rows)
50) 4 Sc, Dec, (8 Sc, Dec) * 5, 4 Sc (54)
51) (7 Sc, Dec) * 6 (48)
52) 3 Sc, Dec, (6 Sc, Dec) * 5, 3 Sc (42)
53) (5 Sc, Dec) * 6 (36)
54) 2 Sc, Dec, (4 Sc, Dec) * 5, 2 Sc (30)
55) (3 Sc, Dec) * 6 (24)
56) 1 Sc, Dec, (2 Sc, Dec) * 5, 1 Sc (18), fill the head
57) (1 Sc, Dec) * 6 (12)
58) 6 Dec, cut the thread, fasten, tighten the hole
Breast (we knit in rotary radas just like wings):
9 Ch
1) from the second loop we knit 8 Sc
2) İnc, 6 Sc, İnc (10)
3) İnc, 8 Sc, İnc (12)
4) İnc, 10 Sc, İnc (14)
5) İnc, 12 Sc, İnc (16)
6) İnc, 14 Sc, İnc (18)
7) İnc, 16 Sc, İnc (20)
8) 20 Sc
9) İnc, 18 Sc, İnc (22)
10) İnc, 20 Sc, İnc (24)
11) 3 Sc in 1 loop, 22 Sc, 3 Sc in 1
loop (28)
12) – 18) 28 Sc (7 rows)
19) Dec, 24 Sc, Dec (26)
20) Dec, 22 Sc, Dec (24)
21) Dec, 20 Sc, Dec (22)
22) Dec, 18 Sc, Dec (20)
23) Dec, 16 Sc, Dec (18)
24) Dec, 14 Sc, Dec (16)
Next we tie around the entire perimeter of Sc.
The second breast (yarn “Yarnart” “Mink”):
(we also knit in rotary rows):
10 Ch
1) from the second loop we knit 9 Sc
2) İnc, 7 Sc, İnc (11)
3) İnc, 9 Sc, İnc (13)
4) İnc, 11 Sc, İnc (15)
5) İnc, 13 Sc, İnc (17)
6) – 7) 17 Sc (2 rows)
8) Dec, 13 Sc, Dec (15)
9) Dec, 11 Sc, Dec (13)
10) Dec, 9 Sc, Dec (11)
11) Dec, 7 Sc, Dec (9)
12) Dec, 5 Sc, Dec (7)
13) Dec, 3 Sc, Dec (5)
14) Dec, 1 Sc, Dec (3 Sc)
15) all 3 together, thread
cut, fasten
Legs (yarn “YarnArt” “Jeans”, 2 pcs.):
We knit 3 fingers, on the 1st and 2nd
we cut the thread, and on the 3rd
do not cut, we will
knit on:
1) 6 Sc in Magic Ring
2) (1 Sc, İnc) * 3 (9)
3) 9 Sc
Next we connect everything
fingers between each other
at the junctions we will
skip 1 loop on both
fell ichchik (see diagram).
Knit 4 Sc, then follow
second finger 4 Sc
on the third finger
8 Sc, do not forget
what’s between the fingers
1 loop on both sides
skip, knit
2 fingers again
the back of 4 Sc, and by
first finger 4 Sc.
4) Connected (24 Sc)
Holes formed
we sew, we knit further.
Now for the marker you can not
follow. We make decreases from both
sides, through a row (just
fold in half and do
decreases on the very edges)
5) two decreases from 2 sides (one on each side) (22 Sc)
6) 22 Sc
7) decreases from 2 sides (20 Sc)
8) 20 Sc
9) decreases from 2 sides (18 Sc)
10) 18 Sc
11) decreases from 2 sides (16 Sc),
fill the foot in the course of knitting
12) 16 Sc
13) decreases from 2 sides (14 Sc)
14) 14 Sc
15) decreases from 2 sides 12 Sc
16) decreases from 2 sides (10 Sc)
17) 5 Dec
Muzzle (we knit extra yarn.
colors,
see diagram):
12 Ch
1) we knit from the second loop:
İnc, 9 Sc, 4 Sc last
loop, deploy
knitting and knitting on the bottom
side of the chain (it turns out
oval):
9 Sc, İnc (26)
2) 2 İnc, 9 Sc, 4 İnc, 9 Sc, 2
İnc (34)
3) (1 Hdc, İnc Hdc) * 2, 3
Hdc, 3 Sc, 3 Hdc, (1
Hdc, İnc Hdc) * 4, 9 Sc, (1
Hdc, İnc Hdc) * 2 (42),
we cut the thread, fix
Eyes (knit with yarn
Vita Coco):
(the eye consists of white and
black part)
White part of the eye:
1) 6 Sc in Magic Ring
2) 6 İnc (12)
3) Turn the knitting and
knit in the opposite direction
(1 Sc, İnc) * 5 (15), we are looking for
middle loop and knit in
her 4 Sc, Sl-st with the first loop
3) Further knitting is not unfold and knit 6 Sc, 6 Dc, 6 Sc (18)
Attach the black thread
colors and tie Sl-st for
loop front wall
pulling out the loops a little
so as not to goggle (see
a photo).
Black part of the eye:
4 Ch
1) we knit from the second loop: 2 Sc, to the outermost loop 3 Sc, expand the knitting knit on the underside
chains (oval) 1 Sc, İnc (8)
2) İnc, 1 Sc, 3 İnc, 1 Sc, 2
İnc (14), Sl-st thread cut,
leaving the end for
sewing, fasten
Sew the black part
eyes to white (see photo),
embroider flare.
Beak (knit with yarn
“YarnArt” “Jeans”):
1) 6 Sc in Magic Ring
2) (1 Sc, İnc) * 3 (9)
3) (2 Sc, İnc) * 3 (12)
4) 2 İnc Hdc, 1 Sc, 2 İnc
Hdc, 1 Sc, 2 İnc Hdc, 1 Sc,
2 İnc Hdc, 1 Sc (20)
4) 1 Sc, İnc Hdc, 1 Hdc, İnc
Hdc, 7 Sc, İnc Hdc, 1
Hdc, İnc Hdc, 6 Sc (24)
5) 24 Sc, Sl-st
cut the thread, leave end for sewing, we fix.
Tail
1) 6 Sc in Magic Ring
2) (1 Sc, İnc) * 3 (9)
3) 9 Sc
4) (2 Sc, İnc) * 3 (12)
5) 12 Sc
6) (3 Sc, İnc) * 3 (15)
7) 15 Sc
8) (4 Sc, İnc) * 3 (18)
9) 18 Sc, Sl-st, cut the thread,
fasten, a little fill the tail.
TOY ASSEMBLY
Sew a breast of yarn Yarnart Mink on top
main breast.
Next, sew the breast to to the body.
Sew the muzzle straight
over the breast, fill
a little cheek.
Next, sew the legs
below the body.
We make a face.
Sew a beak in the middle of the cheeks (attach beak shape yourself along the way sewing a little it fill). We embroider with black thread a strip in the middle beak.
Sew white eyes thread behind the back wall loops (the thread remains with us, when we blindfolded around the perimeter black front thread color wall).
We embroider the eyebrows.
Making a forelock on the back of the head (optional). For this i cut the yarn
“YarnArt” “Jeans” blue colors on fragments and tied to each a loop on a knot on one piece of thread.
The number of threads that need to cook purely individual and depends on your desire and taste.
Then you need them to cut, namely trim to that length which will seem to you optimal.
Sew a little tail flattening it. YOUR PENGUINS
READY!